Installed SCSI CD-ROM drive does not work due to device error 7 or 26.
Error:
Device error occurred, the device is using an outdated driver.
Cause:
Device error number 7 or 26 occurred. SCSI controller is using an outdated driver.
Solution:
Contact next-level support or the manufacturer for an updated driver and reinstall the CD-ROM drive.
1)Open the 'Device Manager'.
Device Manager 2) Select the 'View devices by type' radio button, and double-click on 'Hard disk controllers' in the 'View devices by type' list box.
3) Select the SCSI controller drive and click 'Remove'. (The 'Confirm Device Removal' dialog box appears.)
'Confirm Device Removal' dialog box 4) Click 'OK'.
5)Restart Windows 95.
6) After the computer has restarted, Open the 'Add New Hardware' icon and click 'Next'.
'Add New Hardware Wizard' dialog box 7) Select the 'No' radio button and click 'Next'.
Select 'No' radio button and click 'Next' 8) Double-click on the appropriate device type in the 'Hardware types' list box.
9) Select the device manufacturer from the 'Manufacturers' list box, and then select the device model from 'Models' list box.
10) Click 'Have Disk...' and follow the manufacturer's instructions.
Click 'Have Disk...' 11) Select the appropriate resources (i.e. IRQ, DMA, and I/O addresses) for the device driver, and click 'Next'.
CAUTION: Please refer to the device's installation manual before assigning resources for the driver. Incorrectly assigning resources to a driver may cause conflicts with other devices. 12) Click 'Finish'.
Click 'Finish' 13) Click 'Yes' to restart the computer.
'System Settings Change' dialog box
Device Manager